Quantcast
Channel: Automotive Repair Manual Download and Reviews » Search Results » 2003 buick lesabre abs module removal
Viewing all articles
Browse latest Browse all 10

Buick LeSabre Replace Rear Brake Pads Instructions

0
0

A key security function of your Buick LeSabre is the braking system. Sustaining your braking system is a vital duty as a automobile proprietor, as failure to take action can result in damage or worse for you or others. Changing the rear drum brakes in your LeSabre is a job that you are able to do yourself in only a few hours with the suitable instruments and data.

Buick LeSabre Replace Rear Brake Pads Instructions

1. Park the LeSabre on flat ground. Ensure that the emergency brake is on and that the automobile is in “Park.”

2. Loosen the lug nuts on the rear tires in order that you’ll not want to use a substantial amount of pressure to remove them when the automobile is up on the jack stands.

3. Jack up the rear of the automobile and place one jack stand beneath the outer body of the automobile on all sides. Look in your proprietor’s handbook for the precise place. Slowly lower the automobile onto the jack stands.

4. Loosen and remove the lug nuts from the rear wheels, then remove them. From this level on, work on the brakes one aspect at a time.

5. Take away the brake drum from the wheel hub. If it will not slide off, you will want to retract the brake footwear. To retract the brake sneakers, remove the oblong rubber plug from the again of the brake, then rotate the sprocket contained in the drum with a flat-head screwdriver. Use an upward movement and preserve rotating the sprocket till the drum comes off.

6. Clear the drum with brake wash. The brake mud would possibly include asbestos, so put on rubber gloves and security goggles and keep away from making direct contact with the brake wash and brake mud.

7. Disconnect the shoe retracting springs from the pin on the high of the brake with the brake spring removing tool, then use the tool to remove the springs on the backside of the brake.

8. Find the auto-adjuster tab and carry it up with a pair of pliers and a screwdriver and disconnect the auto-adjuster cable. The auto-adjuster tab is a small steel tab on the backside of the wheel hub.

9. Take away the first braking shoe from the wheel hub (it must be utterly disconnected), then detach the secondary braking shoe from the parking brake cable and remove it.

10. Wash off the wheel hub with brake wash, taking the identical precautions that you just did in Step 6.

11. Apply brake grease to the areas of the wheel hub the place it would come into contact with the brake sneakers.

12. Slide the brand new brake pads into the identical place the place the previous pads had been situated.

13. Re-assemble the brake, reversing the method that you simply used to take it aside. Repeat this course of for the brakes on the opposite facet.

14. Place the tires again onto the hubs and screw the lug nuts into place. Do not tighten the lug nuts all the way in which; simply use sufficient pressure so that you simply meet resistance once you flip the lug wrench.

15. Jack the automobile up and remove the jack stands. Slowly lower the LeSabre to the bottom and tighten the entire lug nuts.

Read More : How to Replace Rear Brake Pads on a Buick LeSabre


Viewing all articles
Browse latest Browse all 10

Latest Images

Trending Articles





Latest Images